WithinRangeFract32

Overview

Checks if the input signal levels are within a specified upper and lower range.

Discussion

This module determines if the input signal falls within a specified range. The range is specified by the instance variables .lower and .upper. An input sample falls within the range if (in[i] >= .lower) && (in[i] <= .upper). The instance variable .withinRange is set to 1 if all of the input samples are within range. If one or more input samples are outside of the allowable range, then .withinRange is set to 0.

The module has an optional output pin. If OUTPUTVALUE=0, then there is no output pin. If OUTPUTVALUE=1, then the output pin contains 1 sample equal to the .withinRange variable. If OUTPUTVALUE=2, then the output pin is the same size as the input pin and contains Boolean results on a sample-by-sample basis.

When the module is bypassed, the output is set to 1.

Module Pack

Standard

ClassID

classID = 216

Type Definition

typedef struct _ModuleWithinRangeFract32
{
ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
fract32 lower;                                // Lower edge of the allowable range
fract32 upper;                                // Upper edge of the allowable range
INT32 withinRange;                            // Equals 1 if all input samples in the block are within range.  Otherwise equals 0.
INT32 outputValue;                            // Specifies the behavior of the output pin.
} ModuleWithinRangeFract32Class;

Variables

Properties

Name	Type	Usage	Default Value	Range
lower	fract32	parameter	-0.5	-1:1
upper	fract32	parameter	0.5	-1:1
withinRange	int	state	0	Unrestricted
outputValue	int	const	1	Unrestricted

Pins

Input Pins


Name	in
Description	audio input
Data type	fract32
Channel range	Unrestricted
Block size range	Unrestricted
Sample rate range	Unrestricted
Complex support	Real

Output Pins


Name	out
Description	Boolean
Data Type	int

Matlab Usage

File Name: within_range_fract32_module.m 
 M=within_range_fract32_module(NAME, OUTPUTVALUE) 
 This module determines if the input signal falls within a specified 
 range [.lower .upper].  The module sets an internal Boolean variable 
 .withinRange to 1 if (input >= .lower) and (input <= .upper). 
 If the input signal is not within the allowable range, then .withinRange 
 is set to 0.  Arguments: 
    NAME - name of the module. 
    OUTPUTVALUE - specifies whether the behavior of the module's output 
                  pin, if any.  OUTPUTVALUE=0, then the module does not 
                  have an output pin.  If OUTPUTVALUE=1, then the output 
                  pin has size [1x1] and contains the variable .withinRange. 
                  If OUTPUTVALUE=2, then the output pin is the same 
                  dimension as the input pin and contains a sample-by-sample 
                  Boolean value.  By default, OUTPUTVALUE=0. 

 The variable .withinRange is set based on whether all samples in the 
 input pin are within the allowable range.