InvertFract32

Overview

Phase invert module

Discussion

This module inverts the phase of a signal. Inverting the phase is simply multiplying by -1. The variable isInverted is a Boolean which controls the behavior. When isInverted=1, the module multiplies the input signal by -1. When isInverted=0, the module passes the input signal through unchanged. Internally, the module uses a first order smoother to seamlessly switch between +1 and -1. The smoothing time of the switching process is set by the smoothingTime variable.

Module Pack

Standard

ClassID

classID = 145

Type Definition

typedef struct _ModuleInvertFract32
{
ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
INT32 isInverted;                             // Boolean that specifies whether the signal is inverted (=1) or not (=0)
FLOAT32 smoothingTime;                        // Time constant of the smoothing process
FLOAT32 currentGain;                          // Instantaneous gain applied by the module.  This is also the starting gain of the module.
FLOAT32 smoothingCoeff;                       // Smoothing coefficient
fract32 currentGainFract32;                   // Instantaneous gain applied by the module.  This is also the starting gain of the module.
fract32 smoothingCoeffFract32;                // Smoothing coefficient
} ModuleInvertFract32Class;

Variables

Properties

Name	Type	Usage	isHidden	Default Value	Range	Units
isInverted	int	parameter	0	0	0:1
smoothingTime	float	parameter	0	10	0:1000	msec
currentGain	float	state	1	1	-1:1	linear
smoothingCoeff	float	derived	1	0.002081	Unrestricted
currentGainFract32	fract32	state	1	1	Unrestricted
smoothingCoeffFract32	fract32	derived	1	0.0020811	Unrestricted

Pins

Input Pins


Name	in
Description	audio input
Data type	fract32
Channel range	Unrestricted
Block size range	Unrestricted
Sample rate range	Unrestricted
Complex support	Real

Output Pins


Name	out
Description	audio output
Data Type	fract32

Matlab Usage

File Name: invert_fract32_module.m 
 M=invert_fract32_module(NAME) 
 Creates a module which inverts the phase of a signal (that is, sets the 
 gain equal to -1).  The change happens smoothly with a specified  
 smoothing time.  Arguments: 
    NAME - name of the module.