AttackDecaySustainRelease

Overview

Multi-channel envelope detector with programmable attack time, decay time, sustain level and release time

Discussion

Envelope detector used in dynamics processor. The module accepts an N-channel buffer of input signal and produces an output buffer the same size as the input. An envelope detector is applied to the input that has programmable attack, decay and release times along with sustain level. These programmable times are time constants for an exponential envelope. The attack time applies when the startAttack flag is active and will be in attack stage untill the level reaches maxLevel. When the level reached the maxLevel then the stage changed to decay state. In the decay state if the level reaches sustainLevel then it stays at the sustainLevel untill the startRelease flag is active. The release time applies when the startRelease flag is active. The level is smoothed to 0 from sustainLevel. Detector will be in release state untill startAttack flag is active. This is an exponential envelope.

Module Pack

Advanced

ClassID

classID = 1212

Type Definition

typedef struct _ModuleAttackDecaySustainRelease
{
ModuleInstanceDescriptor instance;            // Common Audio Weaver module instance structure
FLOAT32 attackTime;                           // Time taken for initial run-up level from nill peak, beginning when the key is first pressed.
FLOAT32 decayTime;                            // Time taken for the subsequent run down from the attack level to the designated sustain level.
FLOAT32 sustainLevel;                         // Level during the main sequence of the sound duration, until the key is released.
FLOAT32 releaseTime;                          // Time taken for the level to decay from the sustain level to zero after the key is released.
FLOAT32 maxLevel;                             // Maximum level to which attack phase reach from zero to this level.
INT32 startAttack;                            // Flag indicates start of attack phase. This is a trigger control.
INT32 startRelease;                           // Flag indicates start release phase. This is a trigger control.
FLOAT32 attackCoeff;                          // Internal coefficient realizing the attack time.
FLOAT32 decayCoeff;                           // Internal coefficient realizing the decay time.
FLOAT32 releaseCoeff;                         // Internal coefficient realizing the release time.
INT32 adsrState;                              // Internal state to switch between Attack, Decay, Sustain and Release states.
FLOAT32* envStates;                           // Vector of sample-by-sample states of the envelope detectors; each column is the state for a channel.
} ModuleAttackDecaySustainReleaseClass;

Variables

Properties

Name	Type	Usage	isHidden	Default Value	Range	Units
attackTime	float	parameter	0	2	0.01:1000	msec
decayTime	float	parameter	0	1	0.01:1000	msec
sustainLevel	float	parameter	0	0.5	0:1	linear
releaseTime	float	parameter	0	100	0.01:1000	msec
maxLevel	float	parameter	0	1	0:1
startAttack	int	parameter	0	0	0:1
startRelease	int	parameter	0	0	0:1
attackCoeff	float	derived	1	0.01036	Unrestricted
decayCoeff	float	derived	1	0.02062	Unrestricted
releaseCoeff	float	derived	1	0.0002083	Unrestricted
adsrState	int	state	1	3	Unrestricted
envStates	float*	state	1	[1 x 1]	Unrestricted

Pins

Input Pins


Name	in
Description	audio input
Data type	float
Channel range	1
Block size range	Unrestricted
Sample rate range	Unrestricted
Complex support	Real

Output Pins


Name	out
Description	audio output
Data Type	float

Matlab Usage

File Name: attack_decay_sustain_release_module.m 
 M=attack_decay_sustain_release_module(NAME, NCHAN) 
 Envelope detector with programmable attack, decay, sustain level and release time constants. 

 Arguments: 
    NAME - name of the module. 
    NCHAN - initial number of channels. 

 Copyright 2016.  DSP Concepts, Inc.  All Rights Reserved. 
 Author:  mmohan